Accessories
Heating Cables Accessories
ELTRACE provides a full range of heat tracing accessories
- Details
- Parent Category: Heating Cables Accessories
- Category: DOMOCLICK Fast connector
-
Also available:
DOMOCLICKTM Fast Connector
EASY CONNECTION
Eltrace heating tapes are supplied and connected between themselves with a minimum of manipulations. Only a knife in needed to strip the band ends. The different clicks are made up of only three parts.
SURS
The mounting stages are visible and easily controllable. The upper and lower blades guarantee a sure contact.:
FAST
It takes only a few minutes to assemble the Click, for it involves only four stages:
- Insert the band into the cover and the metal cone
- Strip the band end.
- Insert the heating tape into the Click.
- Push the lever and shut the cover.
CONNECTORS SUITABLE FOR ALL SITUATIONS
- Details
- Parent Category: Heating Cables Accessories
- Category: Thermostats and Controlers
-
Also available:
Ambient and Surface Thermostat with two heating cable outlets ELTH-A5
TWO HEATING CABLES THERMOSTAT
The temperature controller type ELTH-A5 is used as a surface thermostat or as an ambiant thermostat with a remote sensor. It allows the direct connection at the output of one (1) or two (2) heating cables or one (1) or two (2) electric cables (type RVFV-U1000-3G2.5) plus the direct connection of a power supply (type RVFV-U1000-3G2.5).
The device is delivered in its case with a transparent cover which protects it from splashes and can be used in assembly wall. It can be used in an industrial environment (cold industry, maturation, etc.).
It is perfectly suited to the building, construction and industrial market. The thermostat is a liquid expansion type. It is a tinned copper bulb sensing element with a stainless steel diaphragm. Depending on the type of cable and the number of cables, please follow the appropriate option.
- Details
- Parent Category: Heating Cables Accessories
- Category: Thermostats and Controlers
-
Also available:
One-Stage Electronic On/Off Thermostat for Temperature
Dual Digital Display, 2 Setpoints, 1 Control Output + 1 Alarm Output
Product overview
The ELTHB-390 modular thermostat adapts to all cases where temperature control is necessary: atmosphere, air ducts, liquids, solids thanks to the various interchangeable probes available.
ELTH-B390 is a dual set point controller. It can be used for the management of neutral zones. They are equipped with an input for PT100 type thermostatic probes, current 4...20 mA.
The sensor value is displayed on a three-digit display. The controllers are available in standard 4 DIN format and 230 Vac power supply.
- Details
- Parent Category: Heating Cables Accessories
- Category: Thermostats and Controlers
-
Also available:
Electronic Thermostat with PT100 sensor
Thermostat de précision : une sonde de température de type PT100
Download the ELTE electronic thermostat controler datasheet
CARACTÉRISTIQUES GÉNÉRALES DES THERMOSTATS
The ELTE series (ELtrace Thermostat Electronic) electronic controller is equipped with a particularly precise PT100 type temperature sensor. The information is processed by a microcontroller which compares the actual values with set values.
The output relays are triggered according to the configuration. The electronic regulator is provided with connectors and connection terminals for the electrical connection of cables, a waterproof case and a transparent cover.
The device is delivered in its case with a transparent cover that protects it against splashing and can be used for wall mounting. It can be used in an industrial environment (refrigeration industry, maturation, etc.). It is perfectly suited to the building, construction and industrial market.
Technical caracteristics
- Temperature adjustment range (°C) ELTE-1: +0 °C to +100 °C / ELTE-2: +0 °C to +200 °C
- Breaking capacity 15 A / 230 V
- Box dimension 125 × 125 × 75
- Power supply 230 V +/-10 % - 50/60 Hz
- Protection Index (IP) IP66
- Housing material Shockproof thermoplastic
- Sensor PT100 3 m (2 or 3 wires)
- Temperature resistance of the case -30 °C / +80 °C
- Indicator light Green: heating on / Red: sensor fault
- Details
- Parent Category: Heating Cables Accessories
- Category: Thermostats and Controlers
-
Also available:
Thermostat overview - ELTH-A2, ELTH-A3, ELTH-A4
This range of thermostat can be used in applications such as Building, Industry, Refrigeration. The adjustment is very simple, all you have to do is set the desired setpoint temperature. They work with liquid expansion. The base and the cover are made of shockproof thermoplastic with an IP65 degree of protection. A G ½ cable gland for the cable outlet. Free of tension.
- Breaking capacity: 15A / 230 V - 10 A / 380 V
- Protection: IP 65
- Boxe: Shockproof thermoplastic
Surface thermostat - ELTH-A2
- Temperature adjustment range (°C) -20 °C à +40 °C
- Differential (°K) 2 ± 0,5 (K)
- Sensor and capillary Inox
- Maximum bulb temperature +60 °C
- Capillary length 1 m
- Bulb length 95 mm
Surface thermostat - ELTH-A3
- Temperature adjustment range (°C) +10 °C à +90 °C
- Differential (°K) 6 ± 1 (K)
- Sensor and capillary Copper
- Maximum bulb temperature +120 °C
- Capillary length 1,50 m
- Bulb length 142 mm
Ambient thermostat - ELTH-A4
- Temperature adjustment range (°C) -20 °C to +40 °C
- Differential (°K) ± 2 (K)
- Sensor and capillary Copper
- Maximum bulb temperature +120 °C
Additional products
- Terminaison kit: ELKSR-1, ELKSR-H-1
- Support box: ELSP-1, ELSP-2, ELSP-4, ELSP-P3
Subcategories
DOMOCLICK Fast connector Article Count: 1
Thermostats and Controlers Article Count: 4
Thermostat and electronic regulation for electric underfloor heating, heating cord, self-regulating heating cable for building, industry and refrigeration
