High Temperature Heating Cable (120°C / 200°C) for pipe, tank, corrosive atmosphere...

The ESR®-H-BOT serie is a self-limiting heating tape that is suitable for freeze protection and for temperature maintenance in applications up to 120 ºC.

It allows steam cleaning in pipes. The heating element, the insulation and the outer jacket of the ESR-H-BOT are made of fluoropolymers.

The Fluoropolymer is Used as an outer jacket, this material offers increased protection against chemicals
and abrasion.

The heating power of the conductive heating element increases or decreases depending on the ambient
temperature. The self-limitation takes effect at every point along the heating tape. The heating power
adapts to the varying ambient temperatures.
High Temp. Heat Tracing

Cable Construction

1. Copper, nickel-coated 1.25 mm2
2. Heating element : Conductive fluoropolymer
3. Fluoropolymer
4. Braid
5. Fluoropolymer Overjacket

DATASHEET

• Nominal Voltage 230V

• Tolerances -2.5/+2.5 W

• Maximum exposure temperature (energised) 120°C        

• Maximum exposure temperature (deenergised) 200°C         

• Temperature Class T3 (T2 for 60w/m)               

• Minimum Bending Radius 25 mm

• Minimum installation temperature -40°C

• Weight approx 120 kg/km

 Maximum heating cable length circuit:

• ESR-H-2-BOT-10………….. 205 m

• ESR-H-2-BOT-15………….. 190 m

• ESR-H-2-BOT-30………….. 115 m

• ESR-H-2-BOT-45………….. 85 m

• ESR-H-2-BOT-60………….. 65 m

Qualification Produits

Certifications ATEX, GOST-R, EAC, CE

Download ESR-H-BOT heating cable DataSheet